Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2023-05-07 00:11
106
Company Profile
Wuxi Baochuan Machinery Manufacture Co., Ltd.By certification [File Integrity]
Contact:wxscseo(Mr.)
Email:
Telephone:
Phone:
Area:Beijing
Address:Beijing
Website:http://www.wxbcmachine.com/ http://wxscseo.yuanshengsh.com/
Product Introduction
The straight medium speed wire making machine can realize single operation, jog operation, linkage operation, continuous operation of designated blocks, and proportional setting. Pneumatic tuning rolls are mounted between the capstans. It utilizes a special cylinder and air pressure to form the proper tension on the wire and the proper reverse tension on the die. The offset of the adjustment roller causes the connected non-contact sensor to generate a signal to the PLC, thereby controlling the block synchronization. The straight medium speed wire making machine adopts the synchronous control of tuning roller tension feedback. The wire making machine adopts the first-level strong narrow V-belt and the first-level plane secondary enveloping worm gear pair transmission, which has high transmission efficiency and low noise. With a fully enclosed protection system, the machine is safe.
Machine Compositions
1) Pay-off stand
2) Copper rod breakdown machine
3) Online continuous annealer
4) Tension controller(with wire accumulator)
5) Take-up
6) Coiler
Product Specification
Machine Type |
Straight Medium speed LHT400/9 |
Straight Medium speed LHT400/13 |
Wire Outlet |
Cu 3.2-2.2mm Al 4.2-3.0mm |
Cu 3.2-1.4mm Al 4.2-1.8mm |
Wire Inlet |
Cu max 8.0mm Al max 9.5mm |
|
Max drawing speed |
12m/s |
15m/s |
Drawing dies No. |
9 |
13 |
Main Motor |
AC 132KW |
AC 180KW |
Continuous Annealer | ||
Annealing machine type |
BAOC-400T Horizontal type |
|
Annealing voltage current |
DC 65V DC 400A |
|
Take-up type |
|
LHT400/9 is used to produce Copper wire from 8.0mm to 3.2-2.2mm, Aluminum from 9.5mm to 4.2-3.0mm.
LHT400/13 is used to produce Copper wire from 8.0mm to 3.2-1.4mm, Aluminum from 9.5mm to 4.2-1.8mm.
Company Introduction
Wuxi Baochuan/Shuochuan Machinery Manufacture Co., Ltd was established in 2009. We always insist on the company ideology of ''High quality, consistent improvement, conscientious service'', and spare no effort to build our brand and service.
http://www.wxbcmachines.com/